|
|
[ Home > R/C Airplanes > Electric Planes > 3-Channel Airplanes RTF > 3-Channel SD J-3 Piper Cub Radio Remote Controlled RC Airplane RTF ]
  | | |
Exceed RC's SD J3
Grasshopper Scale RC Plane 1:10 SCALE READY TO FLY Electric
Powered RC Airplane, Brand New!
Ready to fly RC with amazing
performance. Complete with 3 channel C&F RC, 9 gram micro
servos, rechargeable battery and charger installed. Even the
pushrods and control surface horns are fitted! Factory built.
Just takes minutes to assemble. You can even remove the RC and
use it in other models! What a great investment in fun!!
The J3 CUB 3 Channel has successfully trained thousands of
newbie radio controlled pilots worldwide. You'll be flying
within minutes of receiving this fully built airplane enjoying
over 12 minute flight times on a single charge thanks to our
new improved NiMH battery and ball bearing gear drive system.
Equipped with a powerful speed electric motor, which starts
with a push of a button, the J3 CUB is capable of take-offs
from the ground with its huge powerful motor and wide
wingspan.
-
Battery Operated 380 Motor Plane
-
Ready to Fly, assembly can be done in 10 mins
- Digital Proportional Speed Controller
Slow
Speed Flying Capable, Goof for Beginner
Shock Resistant Reinforced Foam Fuselage and Strong Wings
2 X
18g micro servo for Rudder and Elevator Control
R/C
Set included, Complete 3 Channel Control including
-
Complete Left/Right Control by Rudder
-
Complete Elevator Control
-
Digital Proportional Motor Speed Control Knob
Superb Quality--Simply The Best RTF Plane you can find
Up
to 300Maltitude, over 15 mins flight time
Powered by 8.4V NIMH re-chargeable battery (110v adaptor
included)
Can
Fly as a Glider (without Motor Power)
Brand NEW
All
tools required are included for you
Assembly take less than 20mins
Best
Looking Plane on the market
Data Sheet:
- Ready to fly (RTF) with
battery charger and RC!
- Includes REAL RC equipment
which can be used in other models!
- Wing span - 37.5 inches
(95.5cm)
- Length - 28.8 inches (73cm)
- Wing area - 13.7dm2
Assembly is a snap! With no tools required,
you can be up and flying within minutes of opening the box!
|
Highlighted features
for this airplane |
 |
Transmitter
3 Channel Radio
Controller features:
- Left/Right Control
- Elevator Control
- Digital Progressive
Motor Speed Control Knob
Newest design
Full 3 Channel capability with a variable speed throttle
control |
 |
These servos are "Designed to work with
almost all Radio Control Systems"
Compatiable w/: FUTABA, JR, HITEC,
AIRTRONICS, GWS, SANWA & AASHAI Radio Systems |
 |
This Receiver Is Designed To Handle Hitec,
Futaba, Airtronics, JR on 27MHz.
Whole-digital modulational circuitry,
with the function of signal discrimination, is sensitive
to receive the signal and strong to resist interference. |
 |
Micro
high frequency electronic speed control with the battery
eliminator circuitry (BEC). It is designed for electric
motors up to a speed 600 in size. It will handle up to an
8 cell battery pack and is rated for a maximum of 22 amps
continous current. |
|
|
Ni-MH Battery
Uses one rechargeable
NiMH battery pack (included) and an automatic DC peak
battery charger. |
|
|
380-Motor |
|
  
2006 GRANDHOBBY.COM.
All Rights Reserved.
Privacy Policy
Tel: 626-968-9860 (9:00am to 7:00pm Pacific Time Monday to Friday)
Fax
Line: 626-968-9830 or E-Mail
Sales@GrandHobby.com
Prices, availability, & specifications are
subject to change without notice.
Grand Hobby is not responsible for inadvertent errors to these pages.
© Copyright Grand Hobby
|
|
|
Contact
Us
Testimonials
Customer
Service
Wholesales
Low
Price Guarantee
Replacement
Parts
Site
Map
Policies
