|
|
[ Home > Nitro Gas Cars > 1/8 Nitro Gas Monster Truck > Radio Remote Control RC Car Nitro Gas Truck Monster Truck 1:8 Hi-Speed Tornado Team Infinity Engine ]
  | | |
Hi-Speed - 'TORNADO' .A 1:8th Scale ready-to-race piece of Nitro Nutter Mayhem!
Based heavily on its little brother Bazooka you can immediately see it is an
extremely well equipped & extremely tough monster truck. Make sure your pets
are nicely tucked up in bed when this mother-of-an-RC-mentalist-Banshee screams
into action. .27ci. Team Infinity Engine (Or Std .21 Engine), Tuned Aluminium
expansion chamber exhaust. Impact Sprung front wishbones, Fully adjustable &
tuneable suspension, Hardened steel gears & diffs (2). Front AND rear biased
adjustable brakes (4 x disks !!!!!!! can only mean one thing STOPPIES R US!).
The spec list is endless...
|
 |
FEATURES HIGHLIGHT |
|
-
No build - fully assembled & ready to run
-
Impressive top speed ~50 MPH (as stated by Manufacturer)
-
Powerful & Very Torquey .27ci. Team Infinity Nitro engine mounted on billet
alloy heat-sink, REQUIRES: Glow fuel ~15%-30% Nitro (available from all good
model shops). Note, you will need to set your engine to run on a specific fuel.
It is then best to stick to that fuel.
-
Rear-facing 180degree free-flow 'U' bend exhaust manifold with silicone joiner
(spring mounted for reduced vibration)
-
Tuned aluminium exhaust system (designed specifically for VERTEX engine)
-
4-wheel drive coupled by steel prop & drive shafts
-
Super-light flywheel for high revving engine
-
Slide action carburettor with large free-flow quality airfilter
-
Directional monster truck tyres (pre-glued to wheels)
-
Anodised wheel mounts
-
Comes with 3 channel Speed FM transmitter/receiver/servo gear (matched for
steering & throttle operation) pre-installed
-
4-wheel drive coupled by steel prop & drive shafts
-
4-wheel drive coupled by steel prop & drive shafts
-
Quality front & rear hardened steel bevel-geared differentials
-
Single speed straight cut hardened steel transmission
-
Very effective prop-shaft mounted disc brakes Front and Rear (4 disks in all
(works on reverse accelerator servo operation)
-
2 mm brushed & anodised, aluminium alloy concave chassis
-
2 mm brushed & anodised aluminium mounting plates
-
Front & rear impact chassis struts
-
Oil filled anodised alloy fully adjustable shock units (multi top & bottom
mount points)
-
Pressure cast Aluminium hubs
-
Fully ball raced hubs, Diffs, Gearbox, Clutch etc etc.
-
'Unbreakable' universal joints (as stated by Manufacturer)
-
Pre-cut painted & decaled body
-
Adjustable double wishbone rear suspension - can adjust the following for you
preferred handling characteristics:
-
Camber
-
Ride height
-
Shock-unit angle
-
Adjustable double wishbone front suspension! can adjust:
-
Camber
-
Toe (Front tracking)
-
Ride Height
-
Shock-unit angle
-
Ship from California, US within 1 - 2 business days upon receive of payment
| Dimensions
|
|
scale 1:8 |
| Length |
|
490 mm |
| Width |
|
305 mm |
| Wheel Base |
|
190 mm |
| Weight |
|
3.3 Kg |
| Wheel Diameter
|
|
116 mm
|
|
|
|
MORE PICTURE |
|
|
  
2006 GRANDHOBBY.COM.
All Rights Reserved.
Privacy Policy
Tel: 626-968-9860 (9:00am to 7:00pm Pacific Time Monday to Friday)
Fax
Line: 626-968-9830 or E-Mail
Sales@GrandHobby.com
Prices, availability, & specifications are
subject to change without notice.
Grand Hobby is not responsible for inadvertent errors to these pages.
© Copyright Grand Hobby
|
|
|
Contact
Us
Testimonials
Customer
Service
Wholesales
Low
Price Guarantee
Replacement
Parts
Site
Map
Policies
